Chiller for Plastic and Rubber Industry

This chiller is mainly used in the Plastic and rubber industry. It can accurately control the molding temperature shorten the molding cycle, increase product quality, and improve production efficiency.

Description

Specification

ModelKC-012SA
Power Supply Voltage3PH-380V-50HZ (220V/220V/415V 50HZ/60HZ)
Cooling Capacity10 ton (34.8 kw, 29,930 kcal/h)
Compressor TypeHermetic scroll type (Piston)
Compressor Power9.4 kW
Refrigerant TypeR22 (R407c/R134a Optional)
Refrigerant Control ModeExpansion valve
Refrigerant Filling Amount8.2 kg
EvaporatorShell and Tube (Water tank with coil)
CondenserFinned type
Cooling Fan TypeLow noise axial flow (Low noise outer rotor fan)
Cooling Fan Air Volume220 cmm
Cooling Fan Power0.75 kW
Tank Volume130 L
Water Pump Power1.1 kW
Input Power11.05 kW
Chilled Fluid Flow6.9 m3/h
DimensionL*W*H=1500*780*1600mm
Weight450 kg
NoteTechnical specifications based on 12°C/7℃ Inlet/outlet chilled fluid temperature. Outdoor ambient temperature DB35℃/WB24℃. Data is subject to change without notice.

KC-012SA Air Cooled Chiller Operation Structure Diagram

N.B: This diagram is only for example, please ask the Kaydeli team for the actual drawing after placing an order, if required.